Nord Drivesystems NORDAC LINK SK250E-FDS, Руководство пользователя

Страница: 93 / 212

5 Parameter
BU 0250 en-3021 93
Pos: 266 /Anleitungen/Elektronik/FU und Starter/5. Parameter/P2xx Motordaten / Kennlinienparameter @ 0\mod_1327588046860_388.docx @ 7838 @ 3 @ 1
5.2.3 Motor data / Characteristic curve parameters
Parameter
{factory setting}
Setting value / Description / Note Supervisor Parameter set
Pos: 267 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P200-P299/Parameter P200 – Motorliste - Allgemeiner Teil [BU0180, BU0200, BU0500, SK 2xxE-FDS] @ 41\mod_1586429779497_388.docx @ 2600932 @ @ 1
P200
Motor list
(Motor list)
P
0 … 73
{ 0 }
The factory settings for the motor data can be edited with this parameter. A 4-pole IE1 three-phase
standard motor with the FI rated power is set at the factory in parameters
P201 … P209 .
By selecting one of the possible digits and pressing the ENTER key, all of the motor parameters
(
P201 … P209 ) are set to the selected standard power. The motor data is based on a 4-pole three-
phase standard motor. The motor data for NORD IE4 motors can be found in the final section of the
list.
Note :
As P200 is = 0 again after input acknowledgement, the set motor can be controlled via the
parameter P205 .
Information
If IE2/IE3 motors are used, after selecting an IE1 motor ( P200 ), the motor data in P201 … P209
must be adapted to the data on the motor type plate.
Pos: 268 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P200-P299/Parameter P200 – Motorliste [SK 2xxE-FDS] @ 12\mod_1468418308713_388.docx @ 338805 @ @ 1
0 = No change
1 = No motor: In this setting, the FI operates without current control, slip compensation and
pre-magnetising time, and is therefore not recommended for motor applications. Possible
applications are induction furnaces or other applications with coils and transformers. In
this case, the following motor data are set: 50.0 Hz / 1500 rpm / 15.0 A / 400 V /
0.00 kW / cos
ϕ
=0.90 / Star / R
S
0.01
Ω
/ I
LEER
6.5 A
2 = 0.25kW 230V 18 = 1.1 kW 230V 34 = 4.0 kW 400V 95 = 0.75kW 230V 80T1/4
3 = 0.33PS 230V 19 = 1.5 PS 230V 35 = 5.0 PS 460V 96 = 1.10kW 230V 90T1/4
4 = 0.25kW 400V 20 = 1.1 kW 400V 36 = 5.5 kW 230V 97 = 1.10kW 230V 80T1/4
5 = 0.33PS 460V 21 = 1.5 PS 460V 37 = 7.5 PS 230V 98 = 1.10kW 400V 80T1/4
6 = 0.37kW 230V 22 = 1.5 kW 230V 38 = 5.5 kW 400V 99 = 1.50kW 230V 90T3/4
7 = 0.50PS 230V 23 = 2.0 PS 230V 39 = 7.5 PS 460V 100 = 1.50kW 230V 90T1/4
8 = 0.37kW 400V 24 = 1.5 kW 400V 40 = 7.5 kW 230V 101 = 1.50kW 400V 90T1/4
9 = 0.50PS 460V 25 = 2.0 PS 460V 41 = 10.0 PS 230V 102 = 1.50kW 400V 80T1/4
10 = 0.55kW 230V 26 = 2.2 kW 230V 42 = 7.5 kW 400V 103 = 2.20kW 230V 100T2/4
11 = 0.75PS 230V 27 = 3.0 PS 230V 43 = 10.0 PS 460V 104 = 2.20kW 230V 90T3/4
12 = 0.55kW 400V 28 = 2.2 kW 400V 44 = 11.0 kW 400V 105 = 2.20kW 400V 90T3/4
13 = 0.75PS 460V 29 = 3.0 PS 460V 45 = 15.0 PS 460V 106 = 2.20kW 400V 90T1/4
14 = 0.75kW 230V 30 = 3.0 kW 230V 46 =
Reserved,
do not use
107 = 3.00kW 230V 100T5/4
15 = 1.0 PS 230V 31 = 3.0 kW 400V … 108 = 3.00kW 230V 100T2/4
16 = 0.75kW 400V 32 = 4.0 kW 230V 94 = 109 = 3.00kW 400V 100T2/4
17 = 1.0 PS 460V 33 = 5.0 PS 230V 110 = 3.00kW 400V 90T3/4
111 = 4.00kW 230V 100T5/4
112 = 4.00kW 400V 100T5/4
113 = 4.00kW 400V 100T2/4
114 = 5.50kW 400V 100T5/4
Pos: 269 /Allgemein/Allgemeingültige Module/---------Seitenumbruch kompakt --------- @ 13\mod_1476369695906_0.docx @ 2265495 @ @ 1