15
Units Selection Menu
The Units Selection menu is where you select the current measurement units for a Measure screen.
To access this screen, tap the units in the measurement dial (see Measure Screen section of the handbook,
“Current Units” for a look at where to tap). Then pick a unit to switch to. If you change your mind and do not
wish to switch, just pick the units you were using before.
If certain units have been disabled in the Settings >> Units Screen, then they will appear greyed out and
cannot be selected.
NOTE: If you set a target, the Measure screen will automatically switch to the correct units for that
target.
NOTE: The units available for selection will vary depending on the type of the currently attached TD
(force, torque or pressure). The screenshot below shows Torque units.
