9
Measure Screen
The Measure Screen allows you to view live results and historic results from the selected AnB port as well as
providing access to all the settings needed to set up and take a measurement. For most users this will be the
most useful screen.
The image below shows all the key areas of the Measurement Screen
See Example 1 (Page 37) - Click Wrench Torque Measurement
Mode Selection
Shows the current mode. Tap to open the Mode Selection Screen (see
Mode
Selection Screen)
Current Target
Shows the current target. Tap to open the Target Select Screen (see
Targets Select
Screen)
Reading Counter
The total quantity of captured readings. If using a target with a defined number of
readings, it will show X of Y readings captured against the target.
Reset Counter
If using a target with specified reading count, resets the X of Y reading counter
Reset
Resets the current reading (if in manual reset mode). If in auto reset, this is disabled
and just reads “auto”
Zero Transducer
Zeros the Transducer
Save
Saves the reading (if in Track mode or in manual reset and a reading has been
captured). If auto-reset is enabled, it toggles auto-save instead.
Select Task Screen
Mode Selection
Current Transducer
(Tap to refresh)
Reset Cycle
Angle
Reading
(Tap to reset)
Torque Result
Readings
Selected Reading
Delete Results
Current Units
(Tap to change)
Save Reading
(track mode &
manual reset)
Toggle
reading save
(auto reset)
Zero Transducer
Current Target
(Tap to change)
Reading counter
Reset reading
counter
