Nivus NivuLog Easy V3, Руководство пользователя

Страница: 91 / 141

Chapter 10 User interfaces
Note:
Example to explain the filter time in conjunction with the ext. warmup time
Basic setting Record interval 5min.
Measurement cycle 1min.
Output channels Ext. warmup time 1sec.
Measurement channels -
>Config. Filter time 500ms
Output on the device Sensor supply
Explanation: The sensor supply is always activated 1sec before expiry of the measurement cycle. The filter
time starts 500ms before expiry of the measurement cycle, which ensures that a valid value is available at the
time of a measurement. However, this also means that the filter time must be taken into consideration when
selecting the ext. warmup time. In the current example, the sensor connected to the input must at the latest
supply stable values 500ms following activation of the sensor supply. Otherwise, invalid values would be taken
into consideration while averaging during the filter time resulting in the measurement value being distorted.
NivuLog Easy V3 - Rev. 03 as of 24.10.2018 91 of 141