Nivus NivuLog Easy V3, Руководство пользователя

Страница: 31 / 141

Chapter 6 Functional principle
6.1.6 Control module
The control module determines the setpoints for the outputs.
The following table specifies the relevant parameters for the module:
Configuration section Mode Parameter Explanation
Output channels Off --- ---
Ext. warmup time Ext. warmup
time
Indicates the amount of time that an output
channel is switched on in "Ext warmup time"
mode before the measurement
Digital --- ---
Freq
Pulse
Measurement channels -
>Trigger Digital
Cnt.Day
Cnt.Intrvl.
4-20mA
0-20mA
0-2V
0-10V OS If this checkbox has been selected, the
setpoint output is only released on the
switchable sensor supply output VOUT if the
trigger is active.
O3 If this checkbox has been selected, the
setpoint output is only released on the
switchable sensor supply output VEXT if the
trigger is active.
OD If this checkbox has been selected, the
setpoint output is only released on the
isolated switch contact (NO, CC) if the
trigger is active.
Cnt.Inf. --- ---
Internal channels -> Trigger --- OS If this checkbox has been selected, the
setpoint output is only released on the
switchable sensor supply output VOUT if the
trigger is active.
O3 If this checkbox has been selected, the
setpoint output is only released on the
switchable sensor supply output VEXT if the
trigger is active.
OD If this checkbox has been selected, the
setpoint output is only released on the
isolated switch contact (NO, CC) if the
trigger is active.
NivuLog Easy V3 - Rev. 03 as of 24.10.2018 31 of 141