Nivus NivuLog Easy V3, Руководство пользователя

Страница: 52 / 141

8.4.1 Wall mounting
For wall mounting the optional "Universal bracket for housing NivuLog Easy 86x126 (NLM0HALEASY)"
equipment is required.
Step 1 of the wall mounting Step 2 of the wall mounting
1 NivuLog Easy V3 3 Assembly loop (included in the delivery scope of
NLM0HALEASY)
2 Delta PT M3.5x8 Torx 15 (included in the delivery
scope of NLM0HALEASY) 4 Raised head tapping screw 3.5x32 (included in
the delivery scope of NLM0HALEASY)
1. First attach the assembly loop (3) using the screws (2) included in the "Universal bracket for housing
NivuLog Easy 86x126 (NLM0HALEASY)" equipment set to the NivuLog Easy V3 (see "Step 1 of the
wall mounting" on page 52).
2. Drilling the holes for mounting:
If you want to use the tapping screws (4) included in the equipment set to secure the assembly loop
(3) to the wall, drill four 6-mm holes in the wall using the drill template as a guide in accordance with
the dimensions in the diagram "Step 2 of the wall mounting" on page 52.
If you want to use your own fastening screws you can use the drill guide provided in the equipment
set to determine the position of the holes. The diameters are then determined by the screws that are
being used and any wall plugs that may be required.
3. Securing the NivuLog Easy V3 to the wall:
If you want to use the tapping screws (4) included in the equipment set, first of all insert the supplied
wall plugs into each of the four drill holes before screwing the NivuLog Easy V3 with the attached
assembly loop (3) to the wall (see "Step 2 of the wall mounting" on page 52).
If you are using your own screws, you must also insert the wall plugs into the holes before mounting
the NivuLog Easy V3 with the attached assembly loop (3) to the wall (see "Step 2 of the wall
mounting" on page 52).
52 of 141 NivuLog Easy V3 - Rev. 03 as of 24.10.2018