Nivus NivuLog Easy V3, Руководство пользователя

Страница: 30 / 141

The following table specifies the relevant parameters for the module:
Configuration section Mode Parameter Explanation
Measurement channels ->
Basis Digital --- ---
Cnt.Inf.
Cnt.Day
Cnt.Intrvl.
0-20mA
4-20mA
0-2V
0-10V Trimming Provided to adjust the zero point
Sensor
offset Specifies the installation height of the sensor
6.1.5 Decay module
The decay module is designed to summarise several measurement values. The average value over a
required time frame or the minimum value within a required time frame can be determined, for example. The
decay module is only available for the 4 universal inputs, with the exception of "Cnt.Inf." and "Cnt.Day"
channel modes.
The following table specifies the relevant parameters for the module:
Configuration section Mode Parameter Explanation
Measurement channels -
>Config. Digital Decay Temporal function in the measurement cycle
Quantity Number of measurement values taken into
consideration during the decay (max. 64). In
this mode, a measurement value is created
upon expiry of the measurement cycle and
when the input signal level is changed. The
changes to the inputs are monitored at one
second intervals.
Cnt.Inf. --- ---
Cnt.Day
Cnt.Intervl.
0-20mA
4-20mA
0-2V
0-10V Decay Temporal function in the measurement cycle
Quantity Number of measurement values taken into
consideration during the decay (max. 64).
30 of 141 NivuLog Easy V3 - Rev. 03 as of 24.10.2018