Nippon Primex NP-2411, Технические характеристики

Страница: 31 / 165

D-F0472 NP-2411/3411 Product Specifications Ver. 1.00
25
4.4 Driving Selection
Fixed partition drives for optimization (no partition, dual, three-way and tetrametric
partition) is available by command.
Selection depends on power supply and print duty.
(1) Selection of partition drive
Please refer to command table.
* Printing speed decreases when selecting partition drive except “no partition”.
(2) Optimization
Switch to each partition mode depending on total dots/lines.
No partition 2 partition 3 partition 4 partition
NP-3411 less than 144 dots
more than 145 dots
less than 288 dots
more than 289 dots
NP-2411 less than 144 dots
more than 145 dots
less than 288 dots
more than 289 dots
* Printing speed varies depending on print ratio and may generate a noise when
selecting optimization mode.
* Up to 1 dot line space may appear also print quality may decrease in a certain degree.
4.5 Print Selection of Full size / Half size
Language font Switching method
Japanese Command [FS &], [FS .] or shift JIS code switch
Korean Command [FS &], [FS .] switch
Code switch (see below)
1 byte code (Half size)
*NOTE1
2 byte code (Full size) 4 byte code (Full size)
1
st
byte 00 h ~ 80 h 81 h ~ FE h 81 h ~ FE h
Chinese 40 h ~ 7E h
2
nd
byte
80 h ~ FE h
30 h ~ 39 h
3
rd
byte 81 h ~ FE h
4
th
byte 30 h ~ 39 h
Greek No switch (only full size, no half size)
Polish No switch (only half size, no full size)
Russian No switch (only half size, no full size)
Scandinavian No switch (only half size, no full size)
Turkish No switch (only half size, no full size)
*NOTE1: Since 00h ~ 1Fh are control code, those will not print.