D-F0472 NP-2411/3411 Product Specifications Ver. 1.00
6
2.2 Paper Specifications
(1) Paper width / thickness
2 inch
3 inch
Paper width
58/60
-1
mm 76/80
-1
mm
Paper thickness
65~150µm
[CAUTION]
* Do NOT change paper width from narrow to wide during operation. (There is possibility
of thermal head damage when scraping against platen directly.)
*Please consult with us when using paper width of 60 and 76mm. (All of the paper
widths are set as default setting.)
(2) Roll paper shape
Paper size (max.)
Thickness
Inner core
Outer core
83mm dia.
65~85µm
12.0mm dia.
18.0mm dia.
83mm dia.
100~145µm
25.4mm dia.
33.4mm dia.
[CAUTION]
*Use standard paper holder PH-10.
(Please consult with us when using paper width of over 84mm dia.)
*Axis core width should be same as the paper width.
*Use separately available attachment when using paper of inner core DIA25.4mm. (see below fig.)
[Conditions for using roll paper]
Make sure to follow the following conditions.
*No glue, no tape at the end of roll paper.
*No deformed core of roll paper.
*Core width should be same size as the paper width.
*Do NOT keep roll paper under environment of high temperature and humidity.
*Roll paper is not loosened. Unable to detect normally when roll paper is loosen.
Since it detects roll paper O.D. by using reflection photo sensor, near end detection will
not be available when using axis core excessing detecting value.
*Printing surface shall be outer surface. Involute paper is not applicable.
DIA25.4mm attachment
DIA12mm