D-F0472 NP-2411/3411 Product Specifications Ver. 1.00
46
39) [Inverted Character SET/RESET] « ESC { n »
Code: [1B]h + [7B]h + n
*[00
≤
n
≤
FF]h
SET/RESET Inverted Character function.
* Only LSB (least significant bit “b0”) is available to “n”.
“b0” has the following meaning.
b0 Descriptions
0 RESET inverted character
1 SET inverted character
* The command is only valid when it is assigned at the beginning of a line.
* Default value of “n” is [00]h.
40) [Partition Drive Selection] « GS % n »
Code: [1D]h + [25]h + n
*[00
≤
n
≤
03]h
Selects partition drive.
* “n” has the following meaning.
* Default value of “n” is [02]h.
* Will be ignored and DO NOT change when out of range.
* Refer to 4.4 Driving Selection.
41) [Definition of Bit Image Download] « GS * n1 n2 Dn »
Code: [1D]h + [2A]h + n1 + n2 + Dn
*[01
≤
n1
≤
FF]h
*[01
≤
n2
≤
30]h
*[n1 × n2
≤
D80]h
Defines bit image download of designated number of dots at “n1” and “n2”.
* Horizontal direction number of dots is “n1 x 8” while vertical is “n2 x 8”.
* “Dn” is a bit image data.
* Once bit image download is defined with this command, it is effective until redefining,
executing [Printer Initialization] or [Software Reset] or turning OFF the power.
* Following diagram indicates relations between bit image data and defined dots.
n1x8dots
d1 MSB
dn2+1
dn2x2+1
d2
dn2+2
dn2x2+2
n2x8dots
LSB
dn2 dn1xn2x8
dn2x2
n(hex) Partition
00 Optimization
(anomaly)
01
Fix without partition
02
Fix in dual partition
03
Fix in three partition