D-F0472 NP-2411/3411 Product Specifications Ver. 1.00
1
1. Overview
1.1
Overview
This printer is categorized as follows:
NP-3411U-*
(1) (2) (3)
(1) Paper size (default setting)
3: 3 inch (default setting: 80mm)
2: 2 inch (default setting: 58mm)
(2) Interface (default setting)
U: USB (V2.0 FULL SPEED) only (standard)
D: SERIAL (RS232C), and USB (V2.0 FULL SPEED)
(3) OEM number (TBD)
1.2 Control No. (default setting)
This product can set specifications except the above items of “standard” and its
specifications will be expressed by 10 digits of control number.
Control number will be determined as “default (ex-factory) setting”
There will be no control numbers for OEM production.
Since there are “Power Supply Jack”, “Auto cutter” and “Paper width” etc. for selectable
specification contents, please confirm to our company for more details.
* In case of ordering with bezel, it is separately packaged from a printer.
Paper
width
Auto
cutter
Mark sensor
Power
jack
Paper
holder
Bezel
NIS No.
Standard
model
Control No.
1
st
,2
nd
digit
3
rd
digit
4
th
digit
5
th
digit
6
th
digit
7
th
digit
70-00361 NP-2411U 58PL120000
70-00362 NP-2411D 58PL120000
58
:58mm
70-00357 NP-3411U 80PL120000
70-00358 NP-3411D 80PL120000
80
:80mm
P:
full cut,
partial cut
L:
left side from
insertion
1:
round
shape
2:
PH-10
0:
None
* Presenter can not be selected.
* Since the above chart is a standard specification, contact us for other specifications.
* When using bezel, beware paper length not to be below 55mm.
(If paper length is below 55mm, it will be difficult to take out paper from the bezel.)