D-F0472 NP-2411/3411 Product Specifications Ver. 1.00
24
4.2 Error Handling
(1) Details of Error Detection
Item Status
Status
information
ALARM
status
Release
Communication 232Ccommunication error
-
-
Match communication
error Parity
condition
Overrun
Framing
Normal Normal
status
- OFF
Print start status Print start setting by
bit7 1
OFF
Print end setting by
command (not error)
command
Mark sensor
If no paper detected
bit5 1
Blink
Open thermal head cover
irregular
during mark sensor
and close it.
Auto cutter error Paper jam
bit4 1
Blink
Open thermal head cover
Remove error factor,
close head cover
Head temperature Head temperature at
bit3 1
Blink
Auto recovery at
irregular
70ºC approx. or more
approx.65ºC of Head
temperature
Paper end
No paper
bit2 1
ON
Paper replenishment
Thermal head
Thermal head cover open
bit1 1
ON
Close thermal
cover open
head cover
Paper near end
Remaining paper detect
bit0 1
Blink
Paper replenishment
detection Paper near end sensor
detection
(MS2-4:OFF)
Printer stops all operations and turns ON the error bit as status information when detecting
errors except for communication error, paper near end and print start status.
4.3 Buffer Full Print
Printer prints preceding data automatically if there is data remained after receiving
data for one line.
In case of using “Data buffer mode” (refer to 5.3 44) [Print start/finish Setting], it will
automatically set remaining data starting from the next line and will print until
conducting print finish setting.
Buffer full data varies on the size of ANK or Kanji respectively. (please refer to “2.1 2
printing specification”)