D-F0472 NP-2411/3411 Product Specifications Ver. 1.00
34
8) [Print Mode Batch Setting] « ESC ! n »
Code: [1B]h + [21]h + n
* [00
≤
n
≤
FF]h
Sets print mode.
* “n” has the following meaning.
value
bit function
0 1
0 Character font
Font A
Font B
1 Undefined
2 Undefined
3 Enhanced
RESET
SET
4 Double
height
RESET
SET
5 Double
width
RESET
SET
6 Undefined
7 Underline
RESET
SET
* If double height and double width are set at the same time, quadruple character will be formed.
* All of the printed characters will be underlined except for the 90º clock-wise rotated
characters and spaces created by [Horizontal Tab].
* Underline width is determined by the value set in [Underline SET/RESET].
Default is “1dot” width.
* Enhanced print character is effective when Kanji mode
* Enables to print with different character sizes mixed e.g. double width and normal size etc.
* Font B is available only when selecting either “International Code Table” or “Japanese
Code Table” or “Code Page 858” in [Character Code Table Selection], also when
selecting Japanese as language font.
* The default of “n” is [00] h.
9) [Absolute Position Setting] « ESC $ n1 n2 »
Code: [1B]h + [24]h + n1 + n2
* [00
≤
n1
≤
FF]h
* [00
≤
n2
≤
02]h
Sets print start point from head of the line by number of dot. (by 1/203-inch position)
*Divide dots at print start point by 256 and quotient shall be “n2” while reminder is “n1”.
* Print start point is (n1 + n2 × 256) from head of the line.
* Disregards setting when beyond end of the line.
* When this command is received in the middle of line, it will be effective even not
passing the current position.
10)
■
[Download Characters Set SET/RESET] « ESC % n »
Code: [1B]h + [25]h + n
* [00
≤
n
≤
FF]h
SET/RESET download characters
* Only least significant bit (b0) is effective to “n”.
“b0” has the following meaning.
b0 Function
0
RESET download character set
1
SET download character set
* Default of “n” is [00]h
