Nikon NPL-632, Инструкция по эксплуатации

Страница: 76 / 206

4 Applications
62 Field Station NPL-632 Instruction Manual
You can delete poor observations and recalculate if necessary. You can also select the
BS point.
1. To start the resection, press
[2]
or select
Resection
in the Stn Setup menu.
2. Enter the point name for the first observation
point (PT1).
3. Enter the target height and press
[ENT]
.
4. Sight PT1 and press
[MSR1]
or
[MSR2]
.
To use the
F2
softkey for F1/F2 measurements,
see Advanced feature: Measuring F1 and F2,
page 60 .
5. To proceed to the next point, press
[ENT]
.
6. Enter the second point (PT2) and its height of
target.
7. Measure to PT2 and press
[ENT]
.
When the instrument has enough data, it
calculates the station (STN) coordinates.
If the angle between known point 1 and known point 2 (measured from the station point) is extremely acute or
extremely oblique, the resulting solution will be less reliable geometrically. For geometric reliability, select
known point locations (or station point locations) that are widely spaced.