Nikon NPL-632, Инструкция по эксплуатации

Страница: 204 / 206

10 Error Messages
190 Field Station NPL-632 Instruction Manual
Z-coordinate is required
100.33
The input point for Benchmark does not have a Z coordinate.
Press any key to return to the PT input screen. Then use a PT that has a Z coordinate.
Removable Memory Devices
These errors relate to the CompactFlash card and / or the USB memory stick.
MAX 32 Jobs
100.34
There were 32 jobs (the maximum number of jobs that can be stored on the
instrument) on the instrument when you tried to copy (import) a job from the
removable memory device.
Press
[ESC]
to return to the BMS screens. Press
[MENU]
and then press
[1]
to delete
unnecessary job files.
No ext. memory
100.35
The system does not recognize the removable memory device in the slot.
Make sure that you insert the CF card or the USB memory stick properly in the slot.
No Job Found
100.36
No job files were found in the removable memory.
Make sure that the job files are stored in \NTTS\JOBS.
Memory shortage
100.37
There are too many files in the removable memory.
Insert the CF card or the USB memory stick into your office computer and then delete
files stored in the \NTTS\JOBS folder. You can then insert the CF card or the USB
memory stick into the instrument.
This file is not Job file
100.38
The file that was imported (copied) from the removable memory to the instrument
was not the Job file.
Repeat the procedure to import the correct Job file from the removable memory.
Data full %
100.39
There is not enough free memory in the instrument for you to copy (import) the Job
from the removable memory.
Press
[ESC]
to return to the BMS screen. Press
[MENU]
and then press
[1]
to delete
unnecessary job files.