Nikon NPL-632, Инструкция по эксплуатации

Страница: 120 / 206

5 Menu Key
106 Field Station NPL-632 Instruction Manual
Calculating and manually inputting coordinates
To enter the Input menu, press
[2]
or select
Input
in
the Cogo menu. There are three functions in this menu
for recording new coordinate points.
HD input
To calculate a coordinate by an angle and distance
input from the base point (P1), press
[1]
or select
AZ+HD
in the Input menu.
Enter the base point (P1). Enter the point name then
and press
[ENT]
.
Enter the azimuth, horizontal distance, and vertical
distance. Then press
[ENT]
.
To enter 123°45'45", type 123.4545 and then press
[ENT]
.
If you do not enter a value in the dVD field, the value
0.0000 is used.
A recording point screen with the calculated
coordinates appears. PT defaults to the last recorded
PT + 1.
Press
[ENT]
to store the point.
Traverse
To open the Traverse (2Pt Angle) function, press
[2]
or
select
Traverse
in the Input menu.
Traverse function calculates a new point based on the
two defined points and the angle, horizontal and
vertical distances from the line that is defined by those
two points.