Nikon NPL-632, Инструкция по эксплуатации

Страница: 72 / 206

4 Applications
58 Field Station NPL-632 Instruction Manual
Horizontal angle hold
To hold the horizontal angle to the current value, press
[5]
or select
Hold
in the Angle menu.
To set the horizontal angle to the displayed value, press
[ENT]
or the
Set
softkey.
To cancel the process and return to the Basic
Measurement Screen (BMS), press
[ESC]
or the
Abrt
softkey.
Station Setup
To open the Stn Setup menu, press
[STN]
in the BMS.
To select a command from this menu, press the
corresponding number key. Alternatively, press
[<]
or
[>]
to highlight the command and then press
[ENT]
. Press
[^]
or
[v]
to move up or down one page.
The last function used is highlighted.
Setting up a station with known coordinates or azimuth
1. Press
[1]
or select
Known
in the Stn Setup menu.
2. Enter a point name or number in the ST field.
–
If the input point number or name is an
existing point, its coordinates are displayed
and the cursor moves to the HI (Height of
instrument) field.
–
If the point is new, a coordinate input
screen appears. Enter the coordinates for
the point. Press
[ENT]
after each field. When
you press
[ENT]
in the CD field, the new
point is stored.
–
If the specified point has a code, the code
appears in the CD field.
3. Enter the instrument height in the HI field and
then press
[ENT]
.