Nice MC824HR, Инструкции и предупреждения по установке и использованию

Страница: 2 / 28

2 – ENGLISH
ENGLISH
Translation of the original instructions in full
CONTENTS
GENERAL SAFETY WARNINGS AND
PRECAUTIONS
1
1 GENERAL SAFETY WARNINGS AND PRECAUTIONS
a
WARNING! Important safety instructions. Observe
all the instructions as improper installation may
cause serious damages.
a
WARNING! Important safety instructions. It is
important to comply with these instructions to
ensure personal safety. Store these instructions
carefully.
a
According to the latest European legislation,
an automated device must be constructed in
conformity to the harmonised rules specified
in the current Machinery Directive, which allow
for declaring the presumed conformity of the
automation. Consequently, all the operations for
connecting the product to the mains electricity, its
commissioning and maintenance must be carried
out exclusively by a qualified and expert technician.
a
In order to avoid any danger from inadvertent
resetting of the thermal cut-off device, this
appliance must not be powered through an external
switching device, such as a timer, or connected to a
supply that is regularly powered or switched off by
the circuit.
WARNING! Please abide by the following warnings:
– Before commencing the installation, check the “Product
technical specifications”, in particular whether this
product is suitable for automating your guided part.
Should it not be suitable, do NOT proceed with the
installation.
– The product cannot be used before it has been
commissioned as specified in the “Testing and
commissioning” chapter.
– Before proceeding with the product’s installation,
check that all the materials are in good working order
and suited to the intended applications.
– The product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capacities, nor by anyone lacking sufficient
experience or familiarity with the product.
– Children must not play with the appliance.
– Do not allow children to play with the product’s control
devices. Keep the remote controls out of reach of
children.
– The system’s power supply network must include a
disconnection device (not supplied) with a contact
opening gap permitting complete disconnection under
the conditions envisaged by Overvoltage Category III.
– During the installation process, handle the product with
care by avoiding crushing, impacts, falls or contact
with liquids of any kind. Do not place the product
near sources of heat nor expose it to open flames. All
these actions can damage the product and cause it to
malfunction, or lead to dangerous situations. Should this
occur, immediately suspend the installation process
and contact the Technical Assistance Service.
– The manufacturer declines all liability for damages to
property, objects or people resulting from failure to
observe the assembly instructions. In such cases, the
warranty for material defects shall not apply.
– The weighted sound pressure level of the emission A is
lower than 70 dB(A).
1 GENERAL SAFETY WARNINGS AND PRECAUTIONS . . . . . 2
2 PRODUCT DESCRIPTION AND INTENDED USE. . . . . . . . . . 3
2.1 List of control unit parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1 Pre-installation checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2 Product usage limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.3 Product identification and overall dimensions . . . . . . . . . . . 4
3.4 Typical installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.5 Installing the control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 ELECTRICAL CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . 6
4.1 Preliminary checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2 Wiring diagram and description of connections . . . . . . . . . 6
4.2.1 Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2.2 Description of connections . . . . . . . . . . . . . . . . . . . . . . . 6
4.2.3 Operations for connection . . . . . . . . . . . . . . . . . . . . . . . 7
4.3 Connecting other devices to the control unit . . . . . . . . . . . . 8
4.4 Addressing of devices connected with the BlueBus system 8
4.5 Initial start-up and electrical connections test . . . . . . . . . . . 8
4.6 Learning of connected devices . . . . . . . . . . . . . . . . . . . . . . 8
4.7 Motor selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.8 Learning of the mechanical stop positions . . . . . . . . . . . . . 9
4.8.1 Learning in automatic mode . . . . . . . . . . . . . . . . . . . . . 10
4.8.2 Learning in manual mode . . . . . . . . . . . . . . . . . . . . . . . 10
4.8.3 Learning in mixed mode . . . . . . . . . . . . . . . . . . . . . . . . 11
4.9 Checking the gate movement . . . . . . . . . . . . . . . . . . . . . . 12
5 TESTING AND COMMISSIONING . . . . . . . . . . . . . . . . . . . . . 12
5.1 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.2 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6 PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.2 Level 1 programming (ON-OFF) . . . . . . . . . . . . . . . . . . . . 13
6.2.1 Level 1 programming procedure . . . . . . . . . . . . . . . . . 13
6.1 Using the programming buttons . . . . . . . . . . . . . . . . . . . . 13
6.3 Level 2 programming (adjustable parameters) . . . . . . . . . 14
6.3.1 Level 2 programming procedure . . . . . . . . . . . . . . . . . 14
6.4 Special functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.4.1 “Move anyway” function . . . . . . . . . . . . . . . . . . . . . . . . 16
6.4.2 “Maintenance notice” function . . . . . . . . . . . . . . . . . . . 16
6.5 Memory deletion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7 TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . 17
7.1 Signalling through warning light . . . . . . . . . . . . . . . . . . . . 17
7.2 Signals on the control unit . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.3 Anomaly log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
8 FURTHER DETAILS (Accessories). . . . . . . . . . . . . . . . . . . . 19
8.1 Connecting an SM-type radio receiver . . . . . . . . . . . . . . . 19
8.2 Connecting the IBT4N interface . . . . . . . . . . . . . . . . . . . . 20
8.3 Connecting the PS324 back-up battery . . . . . . . . . . . . . . 21
8.4 Connecting the Solemyo system . . . . . . . . . . . . . . . . . . . . 21
9 PRODUCT MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . 21
10 PRODUCT DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
11 TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . 22
12 CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
INSTRUCTIONS AND WARNINGS FOR THE USER . . . . . . 25