CBOX936
INSTALLATION AND PROGRAMMING MANUAL
18
CONNECT BLUEBUS PHOTO EYES TO BOARD
IMAGE 6-1:
BLUEBUS CONNECTOR LOCATION
If the kit comes with BlueBUS photo eye pair, connect bus wires (no polarity) into 2-pin BlueBUS connector on
control board (IMAGE 6-1). If an alternative reflective photo eye and reflector are provided, follow installation
instructions included in the kit.
6
1. Place one warning sign (IMAGE 7-1) on outside of gate and the other
inside of gate in high visibility locations (eye height) to warn of entrapment
dangers. If signs cannot be attached to gate, ensure they are as visible as
possible to pedestrians and anyone operating the gate.
2.
Use two tie wraps per sign, or alternative means, to securely affix signs to
gate.
7
ATTACH WARNING SIGNS TO GATE
IMAGE 7-1:
MOVING GATE ENTRAPMENT WARNING SIGN
BLUEBUS
CONNECTOR
IMPORTANT!
Do not attempt to jumper
or short the BlueBus
connector pins as this
will damage the control
board.
www.ApolloGateOpeners.com | (800) 878-7829 | [email protected]
