Nibe PELLUX 100, Инструкция по установке и обслуживанию

Страница: 9 / 76

Simplified menu
Menu tree
1.1.1 - BOILER TEMPERATURE 1.1 - Boiler temp. set 1 - Main menu
1.1.2 - Selection of H.W. temperature 1.2 - HOT WATER TEMPERATURE
1.1.3 - Start and stop of Heat now 1.3 - HEAT NOW
1.1.4 - Selection of control for hot water.
Start and stop.
1.4 - HOT WATER PROGRAM
1.1.5 - Selection of heating temperature 1.5 - HEATING TEMPERATURE
1.1.6 - Selection of control for heating. Start
and stop.
1.6 - HEATING PROGRAM
1.1.7 - Burner ON/OFF 1.7 - BURNER WORK
1.1.8 - Feed fuel ON/OFF 1.8 - FEED FUEL
After opening the simplified menu using either the Up or Down arrows these can be used for orientation in the menu that
one wishes to look at. When you have found the menu that you wish to change or see sub-menus in open it by pressing
Enter.
Explanation Menu
You can see the heat pump's present (large digits) and the set temperatures (small digits)
here.
65.3
Boiler temp. set
To change the set boiler temperature, press Enter.
You can see the hot water's present (large digits) and the set temperatures (small digits)
here.
40.2
HOT WATER TEMPERATURE
To change the set hot water temperature, press Enter.
NOTE
This is an accessory and only works if connected and all settings made in the
control computer.
Here you can temporarily allow the boiler to heat the hot water to a comfortable temper-
ature regardless of the settings.
Heat Now
No
NOTE
This is an accessory and only works if connected and all settings made in the
control computer.
7 PELLUX 100
For Home Owners
Front panel