Nibe PELLUX 100, Инструкция по установке и обслуживанию

Страница: 43 / 76

Alarm
This menu contains the last 20 alarms that occurred when
the control computer was active.
Menu Step
33.3
12:05 05 12:0 TURNED OFF
Tu
OFF
1. In the start menu, press Enter to open the extended menu.
2. Scroll using the Up or Down arrows.
Alarms
3. When you get to the alarm menu, press Enter to open the
menu.
4. Use the Up and Down arrows to select the values you want to
check and acknowledge.
5. Click Enter to acknowledge an alarm.
Alarm list
Main codes
Possible cause Explanation Alarm code
Recurring overheating of the boiler. Processor overheated. 1
Boiler door opened during operation.
For low chimney draught.
Incorrect setting of combustion air for minimum and maximum power.
Fuel finished. No flame or fuel. 2
The flame has gone out for some reason.
Max temperature for burner has been reached. Safety breaker for burner. 3
Boiler door opened during operation.
Burner not in position.
For low chimney draught.
Incorrect setting of combustion air amount.
Damage to the boiler sensor. Short circuit in the boiler sensor. 4
Damage to the bridging.
Damage to the boiler sensor. Open circuit in the boiler sensor. 5
Damage to the bridging.
Damage to the burner sensor. Short circuit in the burner sensor. 6
Damage to the bridging.
Damage to the burner sensor. Open circuit in the burner sensor. 7
Damage to the bridging.
The boiler temperature has exceeded the highest permitted value. Overheating the boiler. 8
Damage to the control computer. Processor reset. 9
Power failure.
-- Temperature limiter 10
-- Communication with module 0. 11
41 PELLUX 100
For the Installer
Service