Nibe PELLUX 100, Инструкция по установке и обслуживанию

Страница: 61 / 76

Dust vacuuming
Sweeping the tubes
Dust vacuuming /
Sweeping
Ash box
Ceramic plate
Soot box
The image shows the areas that can be swept in a PELLUX
TIP
The ceramic plate can be removed or folded to one
side for better access!
Burner cleaning
To clean the burner manually:
1. Switch off the burner and wait until the control com-
puter display reads OFF.
2. Cut the power supply to the burner and wait until it
is has cooled.
3. Clean the fireproof hose and feed pipe to the burner.
4. Scrape the ignition pod and grid clean. Clean the holes
in the grid as well.
5. Remove the ash from the burner and boiler.
APH
Metering pipe
Ignition pod
Grid
Annual maintenance
For safety and for optimum function, the boiler must be
serviced annually by authorised personnel.
1. Extinguish the boiler and allow it to cool.
2. Disconnect the power supply.
3. Remove the grid.
4. Remove the photocell and clean it using a lint free
cloth and a fine abrasive cream (for example tooth-
paste).
5. Clean the fan blades carefully using compressed air.
6. Unscrew the sides of the grid and ignition pod, remove
the cables to the ignition element.
7. Clean the area behind the ignition pod and grid.
8. Reinstall the components again.
9. Clean the pellet hopper and any dust from the pellet
screw.
10. Check the condition of the fireproof hose between
the burner and the pellet hopper.
11. Start the fuel feed to fill the pellet screw and the fire-
proof hose with fuel as far as the burner.
12. Set the burner.
59 PELLUX 100
For the Installer
Service