Nibe PELLUX 100, Инструкция по установке и обслуживанию

Страница: 68 / 76

Technical specifications
IP 21
Class 3 Boiler class according to EN 303-5
942 mm (increases 24 – 39 mm) Height without base
1100 mm Required ceiling height
526 mm Width
800 mm Depth
220 kg Weight
60 litres Volume total
230 V NAC 50 Hz Supply voltage
10 A Fuse
1100 W Base power requirement
11 W Current consumption control unit
IP 21 Enclosure class
0.25MPa (2.5 bar) Max permitted pressure in the boiler
0.25MPa (2.5 bar) Cut-off pressure in the boiler
20 kW Max available output pellet operation
6 -20 kW Output range pellet operation
18.7kW Nominal heating output pellet mode
4.15kg/timme Combustion period pellet mode at Q
N
60 litres Hearth, volume
13 litres Ash box, volume
60 litres Water volume
22 litres Capacity for charging chamber (grille installed)
15 -25 Pa Draught requirement
150 mm Flue diameter
130 °C Exhaust temp. at nominal & minimal heating output
Qn 0.01375kg/sek. Exhaust mass flow at nominal heating output
Qm 0.01027kg/sek. Exhaust mass flow at minimum heating output
250Pa (2.5 mbar) Resistance water side at 20 K
880Pa (8.8 mbar) Resistance water side at 10 K
85 °C Max work temp.
50 - 80 °C Setting range, temp. control
60 °C Minimum temp. return line
300 l, 469 x 553 mm (Part no. 634533) Pellet store capacity and opening dimension.
500 litres 469 x 1000 mm (Part no. 634532) Pellet store capacity and opening dimension.
Wood pellets Fuel type
6 - 10 mm Size
<10% Moisture
PELLUX 100 66
For the Installer
Technical specifications