Nibe PELLUX 100, Инструкция по установке и обслуживанию

Страница: 23 / 76

Menu Step
CH 1
Kitchen
Comf. MAX pump temp 15°C
Ekon. MAX pump temp 10°C
MIN Tch pump 20°C
7. Using the Up and Down arrows scroll to:
႑
Min. supply temperature , click enter to open and set the
minimum supply temperature to the lowest value (+20 °C).
႑
Supply temp. -20 °C 70 °C , click enter to open and set the
supply temperature for outdoor temperature -20 °C.
႑
Supply temp. 0 °C 50 °C , click enter to open and set the
supply temperature for outdoor temperature -0 °C.
႑
Supply temp. +10 °C 40 °C , click enter to open and set the
supply temperature for outdoor tempe10 °C.
႑
Operating mode , click enter to open and select Weather if
you have an outdoor temperature sensor.
႑
Offset heating curve , click enter to open and set the change
of supply temperature for when the outdoor temperature
changes 1 °C.
႑
Supply temperature sensor , click enter to open and select
Yes if you have a supply temperature sensor.
႑
Permanent pump , if your system is controlled by an outdoor
sensor and supply temperature sensor, click enter to open
and select Yes.
Confirm all these settings with Enter.
Settings
8. Click Escape until you are back in the extended menu.
9. Using the Up and Down arrows scroll to: Settings .
10. Press Enter to access the settings menu.
20:54
Settings
SERVICE
11. Using the Up and Down arrows scroll to: Service .
12. Press Enter to open the service menu, see instructions on
page 23 for logging in.
20:54
TURNED OFF
System
configuration
13. Using the Up and Down arrows scroll to: System configuration .
14. Press Enter to open the system configuration menu.
20:54 TURNED OFF
Number of HW circuits 0
Number of buffers 1
Outside temp. sensor No
15. Using the Up and Down arrows scroll to: Outdoor temperature
sensor .
16. Press Enter to open the outdoor temperature sensor menu.
17. Set the outdoor temperature sensor to Yes.
21 PELLUX 100
For the Installer
Installing the boiler