Nibe PELLUX 100, Инструкция по установке и обслуживанию

Страница: 24 / 76

Menu Step
BURNER
18. Check that the burner is instigated. Using the Up and Down
arrows, scroll to: Burner .
19. Press Enter to open the burner menu.
20:54
BURNER
Settings
20. Using the Up and Down arrows scroll to: Settings .
21. Press Enter to open the settings menu.
20:54
Burner on
BURNER
Fuel type
Feed fuel now No
Yes
pellets
22. Set Burner on to Yes.
This is the minimum of what must be activated and set for
the boiler to be started safely.
Depending on which accessory you have for your boiler,
there are other values that must be activated and this is
done as follows. E.g. Number of heating circuits, Number
of HW circuits etc.
Default setting burner
Go to Burner/Service in the control computer's menu and
set these values.
Value Menu
15 Amount of air min (30%)
30 Amount of air max (100%)
7,3 Supply max (100%)
30 Power min (FL2)
100 Power max (FL2)
FL2 Modulation type
50 Photocell
12 gr Fuel weight
5,5 Heating value
14 Amount of oxygen min (30%)
8 Amount of oxygen max
(100%)
50 seconds Start dose
180 minutes Sweeping period
2 Sweeping cycles
PELLUX 100 22
For the Installer
Installing the boiler