
OPERATING INSTRUCTIONS FOR LAP BELT RESTRAINTS WITHOUT A SHOULDER
HARNESS
WARNING
Always wear your seat belt when the vehicle is in operation.
1. Slide the latch up the webbing as far as necessary to make the belt go around your lap.
2. Insert the latch plate into the buckle until you hear a “click.”
3. Adjust and position the belt low and snug across your hips by removing the slack from the belt.
4. To release the belt, push the release button on the buckle.
IMPORTANT
Each belt is intended to restrain only one person at a time. Do not put two people under one belt.
CAUTION
Never attempt to restrain a child in your lap using the lap belt around both you and the child. The child could
be severely injured or killed in the event of a collision.
IMPORTANT
Seat belts are matched sets. Do not mix or use this belt or parts of this belt with other types of seat belts.
CHILD RESTRAINTS
IMPORTANT
Everyone in your vehicle needs to be buckled up at all times. Every state in the United States and all Canadian
provinces require that small children ride in proper restraint systems. This is the law, and you can be
prosecuted for ignoring it.
There are different sizes and types of restraints for children from newborn to near-adult size children. Use the restraint
that is correct for your child:
• The restraint must be appropriate for your child's weight and height. Check the label on the restraint for this, too.
• Carefully follow the instructions that come with the restraint. If you install the restraint improperly, it may not work
when you need it.
• Buckle the child into the restraint exactly as the manufacturer's instructions have directed.
HOW TO MAINTAIN YOUR SEAT BELTS AND RESTRAINT SYSTEM
Periodically examine your restraint equipment to be sure it functions correctly and to be sure there are no worn or
broken components that either needs repair or replacement. Damaged parts must be replaced immediately. Do not
disassemble or modify the system.
WARNING
A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system
periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not
disassemble or modify the system. Seat belt assemblies must be replaced after an accident if they have been
damaged (bent retractor, torn webbing, etc.)
© 2018 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
12