IMPORTANT
Make sure you do not damage portions of the shaft
that will slide through the motor, trantorque, bearing,
and cog wheels.
Only a few tools are necessary to complete this procedure;
however, it requires the gear box to be operational. Follow
the steps to manually retract the slideout by removing the
brake and turning the shaft.
1. First, locate the strap that secures the rubber boot
on the outside of the motor.
2. Remove the strap, and pull off the rubber boot,
removing it from the motor.
3. Remove the four screws from under the rubber boot on the
brake.
4. Once the brake is removed, use a wrench to turn the shaft to
retract the slideout.
5. After the slideout is fully retracted, reinstall the brake.
NOTICE
Depending on the year, model, and floorplan of the coach, the exact slideout motor(s) location may vary.
Generally, they may be accessed from under the bed.
ELECTRIC WARDROBE SLIDEOUTS
The operating switch for the wardrobe slideout is usually located in the bedroom, on the wall beside
the corresponding slideout.
ELECTRIC WARDROBE SLIDEOUT OPERATION
In order to operate the bedroom slideout with the required voltage levels, batteries should be fully charged, the
generator should be powered on, or the coach should be connected to shore power. This maintains the voltage levels
required to operate the slideouts.
© 2018 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
132