
6. Verify that the path of the slideout is unobstructed and free from any surrounding objects, both inside and
outside of the coach. This includes any water or debris that may have collected on the slideout roof or the topper
awning.
IMPORTANT
Debris left on the roof or topper may prevent the slideout from sealing properly when retracted, as well as
prevent the mechanical lock arms from closing properly when the slideout is extended.
7. Retract the slideouts.
8. Inspect all slideouts for complete retraction.
9. If the coach is equipped with manual lock arms, make sure to lock them.
10. Unplug the coach from shore power when you are ready to depart.
IMPORTANT
In the unlikely occasion that the slideout trim has inadequate clearances, try leveling or repositioning the
coach and rechecking the clearances before retracting the slideout.
ELECTRIC BEDROOM SLIDEOUTS
The operating switch for the bedroom slideout is usually located on the bedroom wall. If there is a
full wall slideout on the driver side of the coach, the switch may be located on the wall that
separates the bedroom from the living room.
ELECTRIC BEDROOM SLIDEOUT OPERATION
In order to operate the bedroom slideout with the required voltage levels, batteries should be fully charged, the
generator should be powered on, or the coach should be connected to shore power. This maintains the voltage levels
required to operate the slideouts.
IGNITION LOCKOUT
Due to the slideout safety feature commonly referred to as ‘ignition lockout’, the operation of your slideout will be
prohibited under one or more of the following conditions:
• Partial slideout operation is prohibited when the key is in the accessory or run position, allowing the slideout to
retract, but not extend.
• Total slideout operation is prohibited when the module receives an ignition signal when the key is in the run
position. However, the slideout will operate in the accessory position, because it does not receive an ignition signal.
• Total slideout operation is prohibited when the ignition switch is in either the accessory or run position.
• Total slideout operation is prohibited when the park brake is not set.
• The disabling of the slideout is based on the individual slideout control module programming and the ignition
switch circuit signal.
Once the appropriate safety feature conditions are met and the path of the slideout is unobstructed both inside and
outside of the coach, follow the operating instructions posted in your coach like the examples below.
IMPORTANT
Read entire slideout room instructions posted in your coach before extending or retracting the slideout.
© 2018 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
128