
GENSET
The Genset screen displays the current generator operating status, generator run hours, engine RPM, AC voltage,
frequency (in Hertz), and engine temperature.
WARNING
If the AGS feature is enabled, make sure the coach is outdoors. Do not operate the generator in a confined
space or a garage.
STATUS
Displays the current state of the generator shown above the Start button, including Stopped, Cranking, Running,
Disabled, or Off.
HOURS
Displays the generator total run time (in hours) and is displayed in the upper right hand corner of screen.
START & STOP BUTTONS
Displays the generator operating status and auto generator
start (AGS) start and stop function status. The Start and
Stop buttons allow the user to manually start and stop the
generator.
ACTIVE GENERATOR INFORMATION
• V = generator output (in Volts)
• Hz = generator output voltage frequency (in Hertz)
• F = generator engine temperature (in degrees
Fahrenheit)
• RPM = generator engine speed (in Revolutions per
Minute)
AGS STATUS
This displays the current auto generator start status,
including the following statuses:
RUN DWELL ON
This setting allows the generator to run for a short period of
time after the HVAC set point has been satisfied to make
sure there is not another call for cooling or heating.
This setting also stops the “Cycling” of the generator with
quick on and off commands from the AGS.
AUTOCHARGER
The AGS has activated the generator to recharge the
batteries based on the Auto Genstart Configuration settings.
© 2018 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
166