© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
73
ELECTRICAL
Charging batteries release gasses as the fluids
inside boil, so it is critical to check the battery fluid
levels regularly, particularly after extended periods
of heavy use. Be sure to top o
ff
any battery that is
showing signs of depleted fluid levels.
IMPORTANT
!
On diesel coaches, the house batteries are normally
located in one of the lower compartments. The chassis
batteries are normally on the passenger side in the rear
compartment on diesel pushers and under the driver’s
side cab on the front engine on Super C coaches.
On coaches built on a Ford chassis, batteries are normally
located in the front of the coach and can be accessed by
opening the hood.
Motor Operation
1. Ensure power is being supplied by the 12 VDC
source.
2. Locate the switch installed. If using Southwire
switches, identify the label markings “RETRACT”
located at the top switch position and “RELEASE”
located at the bottom switch position.
3. To retract the cord back onto the reel, press and hold
the switch in the top “RETRACT” position until the
desired amount of cord is returned to the reel.
4. To release the cord from the reel, press the switch
MOMENTARILY in the bottom “RELEASE” position.
This unlocks the spool and allows for the cord to be
manually pulled to a desired length. DO NOT attempt
to pull cord from the reel without first pressing the
switch momentarily in the bottom “RELEASE” position.
Only a MOMENTARY press of the switch in the
“RELEASE” position will be needed. DO NOT attempt
to continuously hold the “RELEASE” switch position,
doing so will cause the cord to unravel on the spool.
Source(s): Southwire Shoreline Reels Operation Instructions Model #RH5
Product(s): TRC 50 Amp 34’ Power Cord Reel w/Pigtail (Model:
RH54331RM, Newmar Part Number: 132025)
This article provides brief operation instructions for a TRC Shoreline Power Cord Reel (Model: RH5)
TRC Shoreline Power Cord Reel Operation (Model: RH5)
This unit is designed with a
clutch type drive to allow direct
engagement during retract and
clutch disengagement to allow
for free spooling during release.
These features are controlled
using the rocker switch assembly
MH2021, RV2100, or equivalent
previously installed.
To correctly operate the unit,
follow the steps listed below. If the
unit does not perform according
to the instructions below, first
recheck wiring for any issues.
Cord Operation
Use only approved applicable outlets. Cord connector has
a built-in Easy-T-Pull handle for easy disconnect.
User Maintenance
This unit does not have any user serviceable parts. The
user can perform periodic inspection of the cord to insure
it is still in usable condition. DO NOT use if the cord is
damaged.
Cord Reels
This article provides an operational overview of the shore power cord reel and switch.
Cord reels (when equipped) provide the ease and convenience of storing the shore power electrical cord in a
neat and compact space with the assistance of motorized retraction. On coaches equipped with a power cord
reel, pull out the power cord, and plug it into an appropriately rated electrical outlet. Make sure the power source is providing
the correct voltage before plugging in the shore cord.
To store the cord, disconnect it from the power source outlet. Remove the cord from the pocket in the compartment, and press
and hold the momentary switch to retract and roll up the power cord as needed. The switch is typically located on the cord
reel or on the compartment door.
Содержание Canyon Star 2021
Страница 1: ...2021 sm ...