© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
177
PLUMBING
Manual Override Operation
In the event of a power failure and emergency flushing is
required, or for cleaning purposes, the flush ball can be
opened with the Manual Override feature.
1. Open the small round
plastic cover on the back
ledge of the toilet.
2. Insert a screwdriver or
other thin blunt-end
rod,and push down on
Manual Override Lever to
open the flush ball.
3. Perform the desired function.
4. The flush ball will close only when electric power is
restored to the toilet.
Source(s): Dometic 4300 4400 Series Toilet Operation Manual
Product(s): This source is associated with more than one product. Refer
to Newgle for more information about the product(s) o
ff
ered for your
coach’s model year.
CAUTION
!
Do not add too much water to the bowl, or the toilet
may overflow.
Adding Water To The Toilet
Bowl
Raise the flush handle or press “Add Water” switch until
desired water level is achieved. More water should be
added when flushing solids.
Flushing The Toilet
Press the handle or “Flush” switch, and then release when
flush is complete.
The Dometic MasterFlush 7600 series electric-flush toilet
macerates waste and pumps it to a holding tank or other
e
ffl
uent storage or disposal system. Operated by a flush
pedal, the toilet allows the user to add water to the bowl
(before using or flushing) and to flush the toilet.
Source(s): Dometic 7600 Series MasterFlush Toilet Instruction Manual
Product(s): This source is associated with more than one product. Refer
to Newgle for more information about the product(s) o
ff
ered for your
coach’s model year.
Dometic Macerator-Style Toilets with Flush Pedal
Operation (Models: 7600 Series)
This article provides basic operation instructions for a Dometic Macerator-Style Toilet with Flush Pedal (Model: 7600 Series).
Adding Water To The Toilet
Bowl
To add water to the toilet, press the flush pedal slightly. To
avoid possible overflow, water flow will stop automatically
if the pedal is pressed too long. More water is usually
added only when flushing solids.
Flushing The Toilet
To flush, press the pedal down completely, then release
it. This activates a powerful macerator pump that siphons
water and waste from the toilet bowl, macerates and
propels the e
ffl
uent to the holding tank.
Residual water trickle in ceramic bowls: Due to
integrated rim of this toilet bowl, water may continue
to slowly trickle into toilet bowl for up to 20 minutes
after flushing. If water trickle continues after 30
minutes, replace water valve.
NOTICE
!
Changing Flush Modes
MasterFlush 7600 series toilets o
ff
er two flush settings to
help manage water consumption:
1. Normal Flush: Uses 0.83 gallons per flush and adds
water to the bowl after every flush.
2. Dry Bowl Flush: Uses 0.21 gallons per flush and does
not add water to bowl after flush.
3. To change from Normal to Dry Bowl flush setting,
press “Flush” pedal for about 10 seconds. Flush mode
has been changed to Dry Bowl setting. Change mode
to Normal flush by following the same procedure.
Содержание Canyon Star 2021
Страница 1: ...2021 sm ...