NewMar Canyon Star 2021, Руководство пользователя

Страница: 48 / 210

© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
43
APPLIANCES
Using The Controls
•
The recommended setting should be correct for
normal household refrigerator use. The controls are
set correctly when milk or juice is as cold as you like
and when ice cream is firm.
•
If the temperature is too warm or too cold in the
refrigerator or freezer, first check the air vents to
be sure they are not blocked before adjusting the
controls.
Depending on your model, your refrigerator has either
an internal control panel, located at the top of the
refrigerator compartment, or an external control panel,
located above the external water dispenser. Follow the
instructions specific to your model.
The display screen on the dispenser control panel will
turn o ff automatically and enter “sleep” mode when the
control buttons and dispenser paddles have not been
used for 2 minutes or more. While in “sleep” mode, the
first press of a control button will only reactivate the
display screen, without changing any settings. After
reactivation, changes to any settings can then be made.
If no changes are made within 2 minutes, the display will
re-enter “sleep” mode. Touch any control button on the
dispenser panel to activate the display screen.
Whirlpool French Door Refrigerator with Water
Dispenser Operation (Models: WRF560SEHZ and
WRF560SEYM)
This article provides basic operation instructions for a Whirlpool French Door Refrigerator with Water Dispenser (Models:
WRF560SEHZ and WRF560SEYM).
There are two refrigerator compartment doors. The doors can be opened and closed either separately or together. There is a
vertically-hinged seal on the left refrigerator door.
•
When the left-hand refrigerator door is opened, the hinged seal automatically folds inward so that it is out of the way.
•
When both doors are closed, the hinged seal automatically forms a seal between the 2 doors.
Wait 24 hours for your refrigerator to cool completely
before adding food. If you add food before the
refrigerator has cooled completely, your food
may spoil. Adjusting the refrigerator and freezer
temperature controls to a colder than recommended
setting will not cool the compartments any faster.
IMPORTANT
!
Internal Control Panel
ADJUSTING THE CONTROLS
If you need to adjust the temperature in either the
refrigerator or freezer compartment, use the settings listed
in the following chart as a guide.
•
Press the Temp button to display the desired number
of snowflakes from 1 snowflake (least cold) to all 5
snowflakes (coldest).
NOTE: Except when starting the refrigerator, do not adjust
the control more than one setting at a time. Wait 24 hours
between adjustments for the temperature to stabilize.
TEMPERATURE CONTROL
For your convenience, the temperature control is preset
at the factory. When you first install your refrigerator, make
sure the control is still set to the recommended setting (3
Snowflakes).
Condition/Reason Adjustment
Refrigerator too warm Fridge Temp: One more snowflake
Freezer too warm or too little ice Freezer Temp: One more snowflake
Refrigerator too cold Fridge Temp: One less snowflake
Freezer too cold Freezer Temp: One less snowflake
COOLING ON/OFF
INTERNAL CONTROL PANEL
•
To turn cooling o ff , press and hold both the Fast Cool
and Moisture Control buttons at the same time for
3 seconds. When cooling is OFF, “Cooling O ff ” will
appear on the display screen.
• To turn cooling back on, press and hold both the Fast
Cool and Moisture Control buttons at the same time
for 3 seconds. When cooling is ON, “Cooling O ff ” will
disappear and the previously selected settings will
appear on the display screen.