© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
12
SAFETY
LAP/SHOULDER COMBINATION
RESTRAINTS
LAP BELT RESTRAINTS WITHOUT A
SHOULDER HARNESS
1.
Enter the vehicle and close the door. Sit back, and
adjust the seat.
2.
The latch plate of the belt is above the back of your
seat. Grasp the latch plate, and pull out the belt. Slide
the latch plate up the webbing as far as necessary to
make the belt go around your lap.
3.
When the belt is long enough to fit, insert the latch
plate into the buckle until you hear a “click.”
4.
Position the lap belt across your thigh, below your
abdomen. If you need the lap portion tighter, pull up
a bit on the shoulder part. A snug belt reduces the
risk of sliding under the belt in a collision. Position the
shoulder belt on your chest so that it is comfortable
and not resting on your neck. The retractor will
withdraw any slack in the belt.
5.
To release the belt, push the release button on the
buckle.
1.
Slide the latch up the webbing as far as necessary to
make the belt go around your lap.
2.
Insert the latch plate into the buckle until you hear a
“click.”
3.
Adjust and position the belt low and snug across your
hips by removing the slack from the belt.
4.
To release the belt, push the release button on the
buckle.
There are di
ff
erent sizes and types of restraints for children
from newborn to near-adult size children. Use the restraint
that is correct for your child:
•
The restraint must be appropriate for your child’s
weight and height. Check the label on the restraint for
this, too.
•
Carefully follow the instructions that come with the
restraint. If you install the restraint improperly, it may
not work when you need it.
•
Buckle the child into the restraint exactly as the
manufacturer’s instructions have directed.
Always wear your seat belt when the vehicle is in
operation.
WARNING
!
Each belt is intended to restrain only one person at a
time. Do not put two people under one belt.
IMPORTANT
!
Seat belts are matched sets. Do not mix or use this
belt or parts of this belt with other types of seat belts.
IMPORTANT
!
Everyone in your vehicle needs to be buckled up
at all times. Every state in the United States and all
Canadian provinces require that small children ride in
proper restraint systems. This is the law, and you can
be prosecuted for ignoring it.
IMPORTANT
!
Some shoulder belts can be adjusted upward or
downward to help position the belt away from your
neck. Push on the anchorage cover to release it, and
then move it up or down to the position that serves
you best.
NOTICE
!
Never attempt to restrain a child in your lap using the
lap belt around both you and the child. The child could
be severely injured or killed in the event of a collision.
CAUTION
!
WARNING
!
A frayed or torn belt could rip apart in a collision
and leave you with no protection. Inspect the
belt system periodically, checking for cuts, frays,
or loose parts. Damaged parts must be replaced
immediately. Do not disassemble or modify the
system. Seat belt assemblies must be replaced
after an accident if they have been damaged (bent
retractor, torn webbing, etc.)
Periodically examine your restraint equipment to be
sure it functions correctly and to be sure there are no
worn or broken components that either needs repair
or replacement. Damaged parts must be replaced
immediately. Do not disassemble or modify the system.
How To Maintain Your Seat
Belts and Restraint System
Содержание Canyon Star 2021
Страница 1: ...2021 sm ...