© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
45
APPLIANCES
DISPENSE WATER
IMPORTANT:
•
The dispensing system will not operate when the
refrigerator door is open.
•
The display screen on the dispenser control panel will
turn o
ff
automatically and enter “sleep” mode when the
control buttons and dispenser paddles have not been
used for 2 minutes or more. While in “sleep” mode, the
first press of a control button will only reactivate the
display screen, without changing any settings. After
reactivation, changes to any settings can then be made.
If no changes are made within 2 minutes, the display
will re-enter “sleep” mode.
To dispense water, press a sturdy glass against the water
dispenser paddle. Remove the glass to stop dispensing.
DISPENSER LIGHT
When you use the dispenser, the light will automatically turn
on. If you want the light to be on continuously, you may turn
on the light. The light icon will illuminate when the light is
ON.
•
ON: Press LIGHT quickly to turn on the dispenser light.
•
OFF: Press LIGHT quickly to turn o
ff
the dispenser light.
NOTES:
•
If you unintentionally press and hold the Light button
for 3 seconds or longer, you will turn on the Moisture
Control feature. If this happens, press and hold LIGHT
for 3 seconds again to turn o
ff
the Moisture Control
feature. The dispenser lights are LEDs that cannot be
changed.
DISPENSER LOCK
The dispenser can be turned o
ff
for easy cleaning or to
avoid unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut o
ff
power to the
refrigerator, to the ice maker, or to the dispenser light. It
simply deactivates the controls and dispenser paddles.
•
Press and hold FAST COOL for 3 seconds to lock the
dispenser.
•
Press and hold FAST COOL for 3 seconds again to
unlock the dispenser. The lock icon will illuminate when
the dispenser is locked.
Ice Maker
IMPORTANT: For models with a water filter, after connecting
the refrigerator to a water source or replacing the water
filter, fill and discard 3 full containers of ice to prepare the
water filter for use.
ICE PRODUCTION RATE
•
The ice maker should produce approximately 8 to 12
batches of ice in a 24-hour period. Allow 3 days to
completely fill the ice container.
•
To increase ice production, lower the freezer and
refrigerator temperature. Wait 24 hours between
adjustments.
•
The quality of your ice will be only as good as the
quality of the water supplied to your ice maker. Avoid
connecting the ice maker to a softened water supply.
Water softener chemicals (such as salt) can damage
parts of the ice maker and lead to poor quality ice. If a
softened water supply cannot be avoided, make sure
the water softener is operating properly and is well
maintained.
•
Do not use anything sharp to break up the ice in the
bin. This can cause damage to the ice storage bin and
the dispenser mechanism.
•
Do not store anything on top of or in the ice maker or
ice storage bin.
Source(s): Whirlpool WRF560 Refrigerator User Instructions
Product(s): Whirlpool Stainless Steel 20 Cu Ft Refrigerator with Water in Door (Model: WFR560SEHZ, Newmar Part Number: 146572) and Whirlpool 19.6 Cu
Ft Monochromatic Stainless Steel French Door Refrigerator w/ Thru-the-Door Water Dispenser
Model: WRF560SEYM, Newmar Part Number: 130238)
TURNING THE ICE MAKER ON/OFF
To turn on the ice maker, simply lower the wire shut-o
ff
arm.
To manually turn o
ff
the ice maker, lift the wire shut-o
ff
arm
to the OFF (arm up) position and listen for the click.
NOTE: Your ice maker has an automatic shuto
ff
. As ice is
made, the ice cubes will fill the ice storage bin and the ice
cubes will raise the wire shut-o
ff
arm to the OFF (arm up)
position. Do not force the wire shut-o
ff
arm up or down.
ICE STORAGE BIN
1.
Wash the ice storage bin with mild soap and warm
water.
2.
Slide the ice storage bin under the ice maker and push
it toward the back as far as it will go.
3.
Lower the arm on the ice maker to the ON position.
NOTE: It usually takes approximately 24 hours for the ice
maker to begin producing ice. You may notice the ice
has an “o
ff
-taste.” If so, discard the first 3 batches of ice
produced. After that the “o
ff
-taste” should be gone.
Содержание Canyon Star 2021
Страница 1: ...2021 sm ...
