© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
40
APPLIANCES
•
While operating in the Automatic mode, the
refrigerators electronic controls will automatically
select the energy source using the following priority
scheme:
❒
1st choice: AC Electric
❒
2nd choice: LP GAS
▷
When in the Auto mode, if a higher priority choice
becomes available (i.e., AC voltage reapplied),
the control shall stop using the current mode and
switch to the higher priority mode.
IF AN ENERGY SOURCE IS AVAILABLE
TO THE REFRIGERATOR BUT IS NOT
OPERATING CORRECTLY:
•
Touch and release the ON/OFF button [30] to start the
refrigerator.
•
Touch the MODE button [31] until the AUTO icon goes
o
ff
and only the AC PLUG icon [278] remains lit.
•
Touch the TEMP SET button [32] as needed, to set the
temperature setting.
•
The AC PLUG icon [278] remains lit until you select
a di
ff
erent operating mode or shut down the
refrigerator.
MANUAL AC MODE OPERATION
•
Touch and release the ON/OFF button [30] to start the
refrigerator.
•
Touch the MODE button [31] until the AUTO icon goes
o
ff
and only the FLAME icon [289] remains lit.
•
Touch the TEMP SET button [32] as needed, to set the
temperature setting.
•
The FLAME icon [278] remains lit until you select
a di
ff
erent operating mode or shut down the
refrigerator.
MANUAL LP GAS OPERATION
•
To shut down the refrigerator, touch and hold the ON/
OFF button [30] for two seconds and release.
SHUT DOWN - ALL MODELS:
Source(s): Norcold Owner’s Manual for Polar 10 Series (N10LX and
NA10LX models) Refrigerators
Product(s): This source is associated with more than one product. Refer
to Newgle for more information about the product(s) o
ff
ered for your
coach’s model year.
•
Touch and release the ON/OFF button [30] to turn the
refrigerator on.
•
Touch the TEMP SET button [32] as needed to set the
temperature setting.
❒
Number one (1) shown in the display [187] is the
warmest setting.
❒
Number nine (9) shown in the display [187] is the
coldest setting.
•
If the AUTO icon [277] and AC PLUG icon [278] are lit
up, it means that:
❒
120 volt AC power is available to the refrigerator.
❒
The refrigerator is operating on AC electric power.
❒
After ten seconds, the backlight of the display goes
o
ff
.
•
If the AUTO icon and the FLAME icon [289] are lit up,
it means that:
❒
120 volt AC power is not available to the
refrigerator.
❒
The refrigerator is operating on propane gas.
❒
After ten seconds, the backlight of the display goes
o
ff
.
AUTOMATIC MODE OPERATION:
•
2-way refrigerators:
❒
The fault codes “no AC” and then “no FL” show in
the display and an audible alarm sounds.
❒
Refer to the “Fault Codes” section of the
refrigerator’s manual for any faults displayed.
•
3-way refrigerators only:
❒
The Auto icon and the Battery icon [361] are lit up.
❒
After ten seconds, the backlight of the display goes
o
ff
.
❒
This means that the refrigerator is operating on DC
electric.
IF NEITHER 120 VOLTS AC NOR
PROPANE GAS ARE AVAILABLE TO
THE REFRIGERATOR :
Содержание Canyon Star 2021
Страница 1: ...2021 sm ...