NewMar Canyon Star 2021, Руководство пользователя

Страница: 60 / 210

© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
55
CHASSIS
POWER ON
Press and release the POWER button to engage power.
All LED’s on the panel will come on then most will go out.
The LED next to the POWER button should be lit RED when
power is on.
To extend the jacks, the ignition key must be in the engine
run or on position and the park brake must be applied.
To retract, the ignition key must be in the engine run or on
position.
If you attempt Auto-Level or All Retract you will hear a “deni”
tone if the key or park brake is in the improper position.
RETRACTING THE JACKS
Equalizer Leveling System Operation
This article provides the step-by-step instructions for operating an Equalizer leveling system.
Auto-Level Operation
AUTO-LEVEL
Press the AUTO-LEVEL button and release. The system will
send out a continuous series of beeps, the ‘OPERATING’
LED will be on RED to let you know AUTO-LEVEL is
operating and will automatically level the coach. When
completed, the keypad will signal a successful level with a
dual-level tone. Press and release the POWER button.
The jacks down LED lights must be o ff for Auto-Level
to function. If needed, press the ALL RETRACT button
to clear and then Auto-Level should function.
IMPORTANT
!
The keypad may be left on once level has been
achieved. The keypad will enter ‘sleep mode’ after
five minutes of inactivity.
NOTICE
!
If your coach is equipped with air suspension, it is
recommended that the coach be started and chassis
air pressure allowed to build before pressing ALL
RETRACT. This will ensure adequate air supply to the
chassis air valves.
NOTICE
!
Read the Operation Manual for your specific leveling
system, and follow all safety warnings and notices.
WARNING
!
This sequential leveling is a patented process that
provides a more precise level throughout the length of
the vehicle, adding stability to the vehicle while leveling
it as low to the ground as possible. It’s quick, easy and
on the level!
To retract all jacks simultaneously, press and release the
All RETRACT button. All jacks will automatically retract
and return to stowed position. The pump will run in
retract mode until all of the jacks are fully stowed (plus
an additional 5 seconds) up to a maximum of 60 or 90
seconds). This is the proper method for retracting the jacks
prior to travel.
You may stop the ALL RETRACT by pressing any button
on the keypad. Jacks may be retracted in pairs by using
the UP ▲ button for each end or side for leveling purposes
however the ALL RETRACT must be used to fully stow the
jacks prior to travel.
The jacks down LED’s will turn o
ff , indicating the jacks are
in the “stowed” position.
EQ Smart-Level
2020 coaches in production after 5/17/2019 may be
equipped with Smart-Level. Control the Equalizer leveling
system via your smartphone! To download Equalizer’s
smartphone app, open up the iTunes or Android Play Store
and type in “EQ Smart Level.”
FEATURES
The Smart-Level has built in Bluetooth capabilities.
Compatible with iPhone, Android, and ASA Electronics iN-
Command Control System.
Manual Operation
POWER ON
Press and release the POWER keypad button to engage
power. All LED’s will come on then most will go out. The
LED next to the POWER button should be lit RED when
power is on.
EXTENDING JACKS MANUALLY
To extend the jacks the ignition key must be in the engine
run or on position and the park brake must be applied.
If you attempt to extend or retract jacks by pressing the
DOWN ▼ or UP ▲ keypad buttons you will hear a “deny”
tone from the keypad if the ignition key and or park brake
is in the improper position.
POWER OFF
Press and release the Power keypad button.
Visually confirm all jacks are retracted prior to travel.
IMPORTANT
!