NewMar Canyon Star 2021, Руководство пользователя

Страница: 164 / 210

© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
159
INTERIOR
Front Privacy Drape / Shade
(Night Shade)
Press the UP or DOWN button for the
appropriate shade. Switches may be labeled
“Front Privacy Drape” or “Shade.” Switch-
operated shades require the switch to be held
until the shade either reaches its limit or the
desired intermediate position (the shade can
be stopped at any point by simply releasing
the switch).
The switch labeled “Front Privacy Drape” or
“Shade” is located in the overhead cabinet or
on the dash and adjusts the windshield shade
up or down.
1. With the ignition on, press and hold the switch in the
down direction to extend the drape to the ignition
stop set limit, which is approximately half-way. This is
to allow the driver to see out the window.
2. With the ignition o ff , press and hold the switch in the
down position to extend the drape until it reaches the
“down” stop set limit.
3. With the ignition on or o ff , press and hold the switch
in the up position to retract the drape until it reaches
the “up” stop set limit.
4. Release the switch during travel to stop the drape
extension or retraction between the “up” and “down”
stop set limits.
Manual Day and Night Shade Operation
This article provides basic operation instructions for the manual day and night shades.
Day Shades
The first section visible when closing the shade is the
“DAY” section. This material is translucent. Sunlight
passes easily through the material into the unit while
allowing a degree of privacy.
TO LOWER THE DAY SHADE:
•
Grasp the shade near the center, and gently pull it
down to the desired position.
•
Release it slowly and gently to maintain the desired
position.
TO RAISE THE DAY SHADE:
•
Quickly pull down the shade and gently release it,
allowing it to retract. If necessary, hold on to the
bottom to control the speed of the retraction.
Night Shades
The second visible section is the “NIGHT” section. This
material is a heavier, more opaque material. Very little to
no light passes through it, so these shades are generally
used in the evening or when more privacy is desired,
though under certain light conditions, it can cast shadows
and silhouettes.
TO LOWER THE NIGHT SHADE:
•
Grasp the shade near the center, and gently pull it
down to the desired position.
•
Release it slowly and gently to maintain the desired
position.
TO RAISE THE NIGHT SHADE:
•
Quickly pull down the shade and gently release it,
allowing it to retract. If necessary, hold on to the
bottom to control the speed of the retraction.