New Leader AGCO NL5258G5 Скачать руководство пользователя страница 89

Страница: 89 / 142

- 89 -

NL5258G5/NL5300G5

www.New-Leader.com
(800) 363-1771

314732-AA-B

Header

Creating a New Pro

NOTE:

When creating a new pro

le for a new material to be spread, spread pattern tests must be

conducted. Spread pattern testing at low and average application rates ensures proper spinner

position for given spreader output. Refer to “Spread Pattern” section of manual for details.

• Press on the Swath Module tab under

Pro

le Management to create a new pro

le.

•

Activate bins to be run on pro

le by selecting

the icons on the display.

• Press to continue.

•

Enter material density for each bin. crush

strength and SGN are not required, but it is

recommended to add the information if proper

measurement tools are available.

• Press to continue.

NOTE:

A crush strength and SGN test kit is

available. See “Spread Pattern” section

of manual for details.

• Enter spinner speed, application speed (ground

speed) and desired swath width.

NOTE:

Spinner speed and swath width are

determined from crush strength and

SGN. See “Spread Pattern” section of

manual for details.

• Press to continue.

Controller Operations

Содержание AGCO NL5258G5















































































































































Результаты поиска

Содержание AGCO NL5258G5

Отзывы:

New Leader AGCO NL5258G5, Руководство оператора, Страница: 89 / 142

Результаты поиска

Содержание AGCO NL5258G5

Отзывы: