New Leader AGCO NL5258G5 Скачать руководство пользователя страница 7

Страница: 7 / 142

- 7 -

NL5258G5/NL5300G5

www.New-Leader.com
(800) 363-1771

314732-AA-B

Header

Preface

PLEASE ! ALWAYS THINK SAFETY FIRST !!

The purpose of this manual is to familiarize the person (or persons) using this unit with the information

necessary to properly install, operate, and maintain this system. The safety instructions indicated by the

safety alert symbol in the following pages supersede the general safety rules. These instructions cannot

replace the following: the fundamental knowledge that must be possessed by the installer or operator,

the knowledge of a quali

ed person, or the clear thinking necessary to install and operate this equipment.

Since the life of any machine depends largely upon the care it is given, we require that this manual be read

thoroughly and referred to frequently. If for any reason you do not understand the instructions, please call

your authorized dealer or our Product Sales and Support Department at 1-888-363-8006.

It has been our experience that by following these installation instructions, and by observing the operation

of the spreader, you will have suf

cient understanding of the machine enabling you to troubleshoot and

correct all normal problems that you may encounter. Again, we urge you to call your authorized dealer

or our Product Sales and Support Department if you

nd the unit is not operating properly, or if you are

having trouble with repairs, installation, or removal of this unit.

We urge you to protect your investment by using genuine HECO parts and our authorized dealers for all

work other than routine care and adjustments.

Highway Equipment Company reserves the right to make alterations or modi

cations to this equipment at

any time. The manufacturer shall not be obligated to make such changes to machines already in the

eld.

This Safety Section should be read thoroughly and referred to frequently.

ACCIDENTS HURT !!!

ACCIDENTS COST !!!

ACCIDENTS CAN BE AVOIDED !!!

Содержание AGCO NL5258G5















































































































































Результаты поиска

Содержание AGCO NL5258G5

Отзывы:

New Leader AGCO NL5258G5, Руководство оператора, Страница: 7 / 142

Результаты поиска

Содержание AGCO NL5258G5

Отзывы: