New Leader AGCO NL5258G5, Руководство оператора, Страница: 25 / 142

- 25 -
NL5258G5/NL5300G5
www.New-Leader.com
(800) 363-1771 314732-AA-B
Header
LIFTING THE SPREADER
WARNING
Use only lifting devices that meet or exceed OSHA standard 1910.184 or ASME B30.20-
2006. Never lift equipment over people. Never lift unit with anything or anybody in the
body. Loads may shift or fall if improperly supported, causing damage to unit, injury or
even death.
CAUTION
Do not use lifting device to free unit from a chassis, storage stands or frozen ground, or to
lift the chassis in any way. Shock loading is prohibited and sudden accelerations should be
avoided. Lifting in such a manner could result in damage to unit or injury.
Always inspect unit lift points for signs of wear, cracking, corrosion, gouges, alterations, or distortion.
Always use a sling, spreader bar, or lifting bar that
attaches to the lifting points with a minimum of
60 degrees from horizontal. It is preferable to use
an “H” style lifting bar that keeps the attaching
chains in a near vertical orientation as shown in
Figure 1. Operators of lifting devices must be
quali fi ed and knowledgeable in their use and
application.
Position the chassis with adequate room around
the unit. Work in an environment that permits
clear communication to others nearby. Keep area
clear of persons when loads are to be lifted and
suspended. Do not allow the lifted load to come
in contact with any obstruction.
Store units on a solid surface using appropriate
storage stands when not installed.
Figure 1 - Lifting Bar
Header
Installation
SPREADER HYDRAULIC REQUIREMENTS
Hydraulics Maximum Flow
GPM (LPM)
Maximum
Pressure
PSI
Spinners & Conveyor 40 (151) 3100
MultApplier 9 (34) 2000
Recommended sequence of installation is:
1. Mounting of spreader.
2. Installation of chassis hydraulic hose and electrical wiring to spreader.
3. Installation of optional parts.
4. Filling of hydraulic reservoir and lubrication.
5. Checking for leaks and proper functioning.