New Leader AGCO NL5258G5, Руководство оператора, Страница: 140 / 142

- 140 -
www.New-Leader.com
(800) 363-1771
314732-AA-B
NL5258G5/NL5300G5
Header
Spread Pattern
NOTE: It is highly recommended that ONLY ONE ADJUSTMENT be made between test samples taken.
If more than one adjustment is made, it will be dif fi cult to determine which adjustment was responsible for
the change in pattern shape.
Problem Pattern Recommended Adjustments
Heavy Directly Behind
the Vehicle
RA
TE/ACRE
1. Move the spinner forward (toward
the conveyor).
Light Directly Behind the
Vehicle
RA
TE/ACRE
1. Move the spinner rearward (away
from conveyor).
Light Outside Vehicle’s
Tire Tracks
RA
TE/ACRE
1. Check spinner fi ns for material
buildup.
2. Increase spinner RPM.
3. Move spinner fi ns to 2 - 3 - 2 - 3
positions. See Figure below.
Pattern Off Center
RA
TE/ACRE
1. Check to see feedgate is level and
free of caked material.
2. Make sure hillside divider is
mounted squarely and centered.
3. Check to be sure spinner assembly
is mounted squarely and centered.
4. Make sure material divider is
mounted squarely and centered.
5. Testing should be done parallel to
wind.
Spinner fi ns are adjustable to radial angle
as shown in Figure 7. Refer back to Figure
6 for fi n adjustment recommendations.
3
2 1 1 2
3
1 1
2 2
3 3
1 2 3 1 2
3
3 3
2 2
1 1
Figure 7 - Spinner Fin Adjustment
TROUBLESHOOTING
Figure 6