New Leader AGCO NL5258G5, Руководство оператора

Страница: 51 / 142

- 51 -
NL5258G5/NL5300G5
www.New-Leader.com
(800) 363-1771 314732-AA-B
Header Lubrication & Maintenance
PREVENTATIVE MAINTENANCE PAYS!
The handling and spreading of commercial fertilizers is a most severe operation with respect to metal
corrosion. Establish a frequent, periodic preventative maintenance program to prevent rapid deterioration to
spreading equipment. Proper cleaning, lubrication and maintenance will yield longer life, more satisfactory
service and more economical use of your equipment.
WARNING
Shut off all power and allow all moving parts to come to rest before performing any
maintenance operation.
HYDRAULIC SYSTEM
Proper oil in the hydraulic system is one of the most important factors for satisfactory operation. Utmost
cleanliness in handling the oil cannot be stressed enough. Keep hydraulic oil in original closed containers,
clean top of container before opening and pouring, and handle in extremely clean measures and funnels.
Check hydraulic oil level and fi lter condition regularly.
Refer to “Lubricant and Hydraulic Oil Speci fi cations” for selection of the proper hydraulic fl uid for use in
the hydraulic system.
WARNING
DO NOT check leaks with hands while system is operating as high pressure oil leaks can be
dangerous! If skin is pierced with hydraulic fl uid at high pressure seek immediate medical
attention as fl uid injected into the skin could cause gangrene if left untreated. Relieve
pressure before disconnecting hydraulic lines or working system. Make sure all hydraulic fl uid
connections are tight and all hydraulic hoses and lines are in good condition before applying
pressure to the system. Wear protective gloves and safety glasses or goggles when working
with hydraulic systems.
WARNING
DO NOT check for leaks adjacent to moving parts while system is operating as there may be
danger of entanglement!
Periodically inspect hydraulic hoses and fi ttings for leaks. Repair and replace components as necessary.
Check hydraulic oil daily by means of sight gauge on hydraulic reservoir. Add oil as necessary to maintain
level around
mid-point of sight gauge. Periodically inspect hoses and fi ttings for leaks.
NOTICE! Change hydraulic oil fi lter after fi rst week (or not more than 50 hours) of operation on a unit.
Controller will warn when fi lter is restricted. Change fi lter when warning sounds.
Drain hydraulic reservoir through drain plug (not through suction outlet), fl ush, and re fi ll, and change fi lter
element annually. Oil and fi lter should also be changed whenever oil shows any signs of breaking down
under continued high-pressure operation. Discoloration of oil is one sign of breakdown.