New Leader AGCO NL5258G5, Руководство оператора

Страница: 106 / 142

- 106 -
www.New-Leader.com
(800) 363-1771
314732-AA-B
NL5258G5/NL5300G5
Header
Boundary Spreading
NOTE:
This program allows the operator to independently modify spinner speeds to change the width of
spread to either side, creating a “boundary” line to maximize spreading ef fi ciency.
• On the Run Screen, press to access
spinner settings.
1. Enter spinner offset:
• The Spinner Settings screen will appear. To create a
Boundary, use the keypad to enter a speci fi c Spinner
Offset. Spread pattern tests should be completed
for each product to be spread to determine best
offset settings, based on density, crush strength and
size. See “Spread Pattern” section for details. Press
to save and return.
2. Enable boundary spreading:
• When running normally, Run Screen will display all
swath sections normally . To activate the Boundary,
fl ip the spinner switch on the switch box to the side
that the boundary is on.
• EXAMPLE: If spreading with a boundary to the right
hand side in relation to direction of travel, fl ip the
switch to the right to limit the spread pattern on the
right hand side.
Controller Operations