Advanced mPOS Design Integrating
Bluetooth
®
Magstripe and EMV Card Reading Functions
Chipper
TM
2X BT
www.ncr.com
Support Operating System:
iOS, Android
MyMobile
Money
Package Contents
Device X1
USB cable
X1
Lanyard X1
Quick Start Guide
X1
Application Download & Installation
This device can support either iOS & Android.
1. Please download the official application from app stores before operation .
2. Please follow app instructions to register and login for proper operation.
3. For any questions, please contact the official application developer.
STEP 3
Select Chipper™ 2X BT in the Scanned Device List
on your
smartphone/tablet. Then, your Chipper™ 2X BT is
connected and green LED will ON.
Reset button
(**please use paper
clip for reset)
Micro USB Port for
Charging & Operation
Index & Accessories (Fig.1)
Power button
For EMV Card Reading
For Magstripe
Card Reading
LED Indicator
Lanyard holder
Quick Start Procedures
STEP 1
Connect Micro USB charging cable to charge the device as
shown to the right.
Download the official application from APP Store or Google
Play Store.
** Chipper™ 2X BT is powered by an internal Lithium Polymer rechargeable
battery pack that cannot be removed or replaced. Before first use, charging is
required for approximately two to three hours. To prevent potential electrical
damage to the Chipper™ 2X BT , please be recommended to use the Micro
USB cable provided with the packaging only.**
STEP 4:
You can follow your application
instruction to start the transaction process, then
swipe, insert or tap card to complete the transaction.
** If you pay via swiping card or inserting EMV IC card, please ensure that the magstripe or EMV chip of the
card is facing the right direction.
Cautions & Important Notes
• Ensure the device is fully charged before use.
• Please ensure magstripe/ EMV chip of the card is facing the right direction when swiping or
inserting card.
• Don’t drop, disassemble, tear, open, crush, bend, deform, puncture, shred, microwave, incinerate,
paint or insert foreign object into the device. Doing any of which will damage the device and
void the Warranty.
• Don’t immerse the device into water and place near washbasins or any wet locations. Don’t spill
food or liquid on the devices. Don’t attempt to dry the device with external heat sources, such as
microwave or hair dryer. Don’t use any corrosive solvent or water to clean the device.
Recommend using dry cloth to clean the surface only.
• Don’t use any sharp tools to point the internal components, connectors or contacts, doing which
may lead to device malfunction and void the Warranty simultaneously.
APP
DOWNLOAD
STEP 2
Turn on the device pairing function of your
smartphone/tablet. Then, press “ ” to turn on the
Chipper™ 2X BT.
** Please ensure that
Bluetooth
®
function of your
smartphone/tablet is ON before device pairing.
Bluetooth
ON
Scanned
Device List
Quick Start Procedures
MyMobile
Money
MyMobile
Money
