General Overview:
The VR proxter reader is a 125 kHz vandal resistant proximity
reader. It is designed with a
34 bits Wiegand Output.
Operation:
The reader’s led is red when ready to read a proximity key.
When a key is presented to the reader, the led flashes red/
green, meaning that the code is transmitted to the controller.
If the key is valid, the led will change to green.
Features:
Power Supply
12V DC (supply by the controller)
Consomption
30mA
Wire gauge
5 wires 6/10 100m max / 14AWG
Dimension
100mm X 45mm X 16mm
Reading distance
up to 6cm (depending on keys)
Frequency
125 kHz
Operating temperature From 0° to 60°
Protection
Diode & Transil
Wiring diagram:
Reader
Controller
V+
PSU +
V-
PSU -
W0
Wiegand 0
W1
Wiegand 1
Led
Led
VANDAL RESISTANT READER 125 kHz 5 WIRES WIEGAND 34 BITS
INSTALLATION GUIDE
V+
V-
W0
W1
Led
V+ V- W0 W1 Led
50-001-042 DOC LEC SAILLIE ANTIVANDALE 125 kHz 5F W34 GB+FR FDI.C
Step by Step...
1. Stick the rubber gasket on the back frame.
2. Fix the back frame with the rubber gasket
on the wall with two screws in the holes A
and B.
3. Once you have mounted the back frame,
you just need to place the reader and fix it
with the two mounting screws supplied.
mounting screws
back frame
rubber gasket
reader
