NETGEAR RH340 - ISDN INET Gateway Router, Справочное руководство

Страница: 34 / 85

Reference Guide for the Model RH340 Internet Access ISDN Router
4-2 Configuring the Router Using FirstGear
Installation of FirstGear Configuration Wizard
FirstGear is a Windows program that is shipped with the Model RH340 Resources CD included
with your router. You must have a CD drive and Windows 95, Windows 98, or Windows NT to
install and use FirstGear.
To install FirstGear on your PC, you must insert the Model RH340 Resources CD and run the
Setup program on the CD.
To install FirstGear:
1.
Insert the NETGEAR Model RH340 Resources CD into the CD drive on your PC.
2.
Click on Start from the Windows toolbar.
3.
Click on Run.
4.
Click on Browse.
5.
Click on the CD drive.
6.
Select Setup.exe.
7.
Click on OK.
The Setup window opens, which loads the FirstGear program to your hard drive.
The Welcome Window opens.
8.
Click on Next.
The Choose Destination Location window opens.
9.
Click on Next to install the FirstGear program in the Program Files folder. If you want to
have the program placed elsewhere, click on Browse to find an alternative location for
the software, and then click on Next.
The Select Program Folder window opens.
10.
Type FirstGear for RH340 in the Program Folders entry field (the default), or select
another folder from the Existing Folders list.
Or you can type in a unique name for the folder. Verify that the information on the window is
correct.
Note:
Be sure the router is connected and has been on for at least one minute before
launching FirstGear.