NETGEAR FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch, Руководство CLI

Страница: 364 / 558

Managed Switch CLI Manual, Release 8.0
Utility Commands 6-47
v1.0, July 2009
option
The
option
command configures DHCP Server options. The
< code >
parameter specifies the
DHCP option code and ranges from 1-254. The
<ascii string>
parameter specifies an NVT
ASCII character string. ASCII character strings that contain white space must be delimited by
quotation marks. The
hex <string>
parameter specifies hexadecimal data. In hexadecimal,
character strings are two hexadecimal digits. You can separate each byte by a period (for example,
a3.4f.22.0c
), colon (for example,
a3:4f:22:0c
), or white space (for example,
a3 4f 22
0c
).
no option
This command removes the DHCP Server options. The
< code >
parameter specifies the DHCP
option code.
ip dhcp excluded-address
This command specifies the IP addresses that a DHCP server should not assign to DHCP clients.
Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging
from 0 to 255. IP address
0.0.0.0
is invalid.
Default none
Format
option <code> {ascii string | hex <string1> [<string2>...<string8>] |
ip <address1> [<address2>...<address8>]}
Mode DHCP Pool Config
Format
no option <code>
Mode DHCP Pool Config
Default none
Format
ip dhcp excluded-address <lowaddress> [highaddress]
Mode Global Config