NETGEAR FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch, Руководство CLI

Страница: 360 / 558

Managed Switch CLI Manual, Release 8.0
Utility Commands 6-43
v1.0, July 2009
host
This command specifies the IP address and network mask for a manual binding to a DHCP client.
Address and Mask are valid IP addresses; each made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid. The prefix-length is an integer from 0 to 32.
no host
This command removes the IP address of the DHCP client.
lease
This command configures the duration of the lease for an IP address that is assigned from a DHCP
server to a DHCP client. The overall lease time should be between 1-86400 minutes. If you specify
infinite
, the lease is set for 60 days. You can also specify a lease duration.
Days
is an integer
from 0 to 59.
Hours
is an integer from 0 to 23.
Minutes
is an integer from 0 to 59.
no lease
This command restores the default value of the lease time for DHCP Server.
Default none
Format
host <address> [{<mask> | <prefix-length>}]
Mode DHCP Pool Config
Format
no host
Mode DHCP Pool Config
Default 1 (day)
Format
lease [{<days> [<hours>] [<minutes>] | infinite}]
Mode DHCP Pool Config
Format
no lease
Mode DHCP Pool Config