Managed Switch CLI Manual, Release 8.0
Log Messages
8-12
v1.0, July 2009
Mac based
VLANS
vlanMacVlanChangeCallback: Failed to
delete an entry
This appears when a dtl fails to delete an
entry for an vlan delete notify event.
Table 8-22: 802.1x Log Messages
Component
Message
Cause
802.1X
function
: Failed calling dot1xIssueCmd
802.1X message queue is full
802.1X
function:
EAP message not received from
server
RADIUS server did not send required EAP
message
802.1X
function
: Out of System buffers
802.1X cannot process/transmit message
due to lack of internal buffers
802.1X
function
: could not set state to <authorized/
unauthorized>, intf xxx
DTL call failed setting authorization state of
the port
802.1X
dot1xApplyConfigData: Unable to <enable/
disable> dot1x in driver
DTL call failed enabling/disabling 802.1X
802.1X
dot1xSendRespToServer:
dot1xRadiusAccessRequestSend failed
Failed sending message to RADIUS server
802.1X
dot1xRadiusAcceptProcess: error calling
radiusAccountingStart, ifIndex=xxx
Failed sending accounting start to RADIUS
server
802.1X
function
: failed sending terminate cause, intf
xxx
Failed sending accounting stop to RADIUS
server
Table 8-23: IGMP Snooping Log Messages
Component
Message
Cause
IGMP Snooping function
: osapiMessageSend failed
IGMP Snooping message queue is full
IGMP Snooping
Failed to set global igmp snooping mode to
xxx
Failed to set global IGMP Snooping mode
due to message queue being full
IGMP Snooping
Failed to set igmp snooping mode xxx for
interface yyy
Failed to set interface IGMP Snooping mode
due to message queue being full
IGMP Snooping
Failed to set igmp mrouter mode xxx for
interface yyy
Failed to set interface multicast router mode
due to IGMP Snooping message queue
being full
IGMP Snooping
Failed to set igmp snooping mode xxx for
vlan yyy
Failed to set VLAN IGM Snooping mode due
to message queue being full
Table 8-21: Mac-based VLANs Log Messages
Component
Message
Cause
Содержание FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Страница 4: ...v1 0 July 2009 iv...
