NETGEAR FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch, Руководство CLI

Страница: 481 / 558

Managed Switch CLI Manual, Release 8.0
Log Messages 8-2
v1.0, July 2009
Table 8-1: BSP Log Messages
Component Message Cause
BSP Event(0xaaaaaaaa) Switch has restarted.
BSP Starting code... BSP initialization complete, starting 7000
series application.
Table 8-2: NIM Log Messages
Component Message Cause
NIM NIM: L7_ATTACH out of order for
intIfNum(x) unit x slot x port x Interface creation out of order
NIM NIM: Failed to find interface at unit x slot x
port x for event(x) There is no mapping between the USP and
Interface number
NIM NIM: L7_DETACH out of order for
intIfNum(x) unit x slot x port x Interface creation out of order
NIM NIM: L7_DELETE out of order for
intIfNum(x) unit x slot x port x Interface creation out of order
NIM NIM: event(x),intf(x),component(x), in wrong
phase An event was issued to NIM during the
wrong configuration phase (probably Phase
1, 2, or WMU)
NIM NIM: Failed to notify users of interface
change Event was not propagated to the system
NIM NIM: failed to send message to NIM
message Queue. NIM message queue full or non-existent
NIM NIM: Failed to notify the components of
L7_CREATE event Interface not created
NIM NIM: Attempted event (x), on USP x.x.x
before phase 3 A component issued an interface event
during the wrong initialization phase
NIM NIM: incorrect phase for operation An API call was made during the wrong
initialization phase
NIM NIM: Component(x) failed on event(x) for
intIfNum(x) A component responded with a fail
indication for an interface event
NIM NIM: Timeout event(x), intIfNum(x)
remainingMask = “xxxx” A component did not respond before the
NIM timeout occurred